WORKSHOP TRAILER WT69



Chassis

  • 2-axle trailer
  • Center distance 1500 mm (59.0″)
  • Parabolic leaf springs
  • Telescopic shock absorbers
  • Drum brakes with ABS
  • Tires 16.00 R 20 tubeless
  • Fuel tank capacity 400 liters diesel (105.6 US gallons)
  • Fuel tank heated with hot water
  • Fuel tank capacity 400 liters gasoline (105.6 US gallons)
  • Fuel tanks with pump for refueling other vehicles
  • Additionally mounted compressed air tank for secondary consumers
  • 4 x LED working lights mounted on back of the body, each 17 W, 700 lm
  • Central tire inflation system
  • Drawbar with NATO towing eye, height adjustable
  • Rear view camera
  • Rear underride guard, manual retractable

Body

  • Length 6900 mm (271.6″), width 2500 mm (98.4″), height 2455 mm (96.6″)

    Inner dimensions of the cabin
  • Length 6780 mm (266.9″), width 2380 mm (93.7″), height 2300 mm (90.5″)

    Frame assembly
  • 3-point kinematic attachment with main and flex mounts
    for stress-free body coupling to the chassis frame

    Body unit construction
  • Self supporting UNICAT sandwich plate panels of fiberglass composite
  • Wall thickness 60 mm (2.36″) with polyurethane foam insulation,
    3 mm (0.12″) FRP outer surface, 2 mm (0.08″) FRP inner surface,
    insulation rating 0.44 W/m2 K (0.078 Btu/ft2 hr °F)
  • Cold bridge-free glued with FRP profiles
  • Bottom panel with integrated welded steel frame and surfaces of FRP
  • Additional insulation of the soil
  • Partition living room to workshop made with sandwich plate panel

    Entrance door and storage compartment doors
  • Entrance door and storage compartment doors constructed of fiberglass composite panels
  • Thickness of doors 60 mm (2.36″)
  • Double sealed doors with heavy duty locks and seal compression
  • Stainless steel hinges throughout
  • 3-point locking door with closing trap and hook,
    additional retractable bolts at top and bottom of the entrance door
  • Safety cylinder locks with protective cap
  • Safety cylinder locks all keyed alike

    Windows
  • Scratch-resistant, burglar-proof hinged UNICAT windows
  • Double insulated thermal window glass
  • Double sealing with combined hollow profile and lip seal
  • Anti-theft stainless steel hinges
  • Window display and lock made of stainless steel
  • Blinds with sun protection and mosquito net

    Roof hatch
  • Scratch-resistant, burglar-proof boat roof hatch with mosquito net in the shower
  • 12 mm (0.47″) acrylic glass
  • Protected built-in hollow profile gasket

    Stairway
  • 8-step aluminium staircase with non-slip treads, for the living room
  • Stairs to the living room with transport bracket in the cabin
  • Folding 7-step aluminium staircase to the workshop, mounted on the rear outside

Interior layout

  • U-shaped seating area for 5-7 persons
  • Rotatable and electrically lowerable table
  • Folding backrests left and right, convertible to 4 bunk beds

    Beds
  • 4 x bunk beds, mattress size: 800 mm (31.4″) x 2000 mm (78.7″) each
  • 1 x bed by lowering the table, size: 780 mm (30.7″) x 2000 mm (78.7″)

    Bathroom / shower
  • Combined shower and toilet room with door to isolate from living area
  • Porcelain toilet
  • Bathroom mirror above the toilet
  • Towel radiator
  • Varicor floor with slope and gutter

    Kitchen
  • Teak countertop with integrated stainless steel sink
  • Cutting board, suitable for stainless steel sink
  • Single lever faucet for hot and cold water
  • Soap dispenser
  • Miele 2-zone induction cooker
  • Miele Wok LPG-flame stove
  • Miele oven with microwave
  • Miele cooker hood
  • Fridge freezer, 130 liters (34.3 US gallons) cooling, 65 liters (17.1 US gallons) freezer
  • Shock-proof separation for tableware, cookware and kitchen appliances
  • Drawer for cutlery with knife block
  • Overhead cupboards above kitchen

    Storage
  • Wardrobe with clothes rail
  • Storage compartments under the benches
  • Cabinet for storing Euro-Fix boxes
  • Aluminium exterior storage boxes

    Workshop
  • Workbench with cabinet
  • Seperation and plug-in system for tools
  • 2 large storage cupboards
  • Drawers with inserts for tools
  • Drilling and milling machine Maxion
  • Welding unit basic with mobile welding machine Lorch
  • Power tools
  • Pneumatic tools
  • Hand tools

    Workmanship
  • All furniture is built to the highest cabinetmaking standard,
    made of wood core plywood with white surfaces and teak edges
  • Heavy duty locks and hinges
  • All drawers on ball bearings
  • Surfaces white with teak edges

    Layout
  • Teak floor in living room, Norament floor in workshop
  • Walls and ceiling are painted with multiple coats
  • Upholstery made of Alcantara

Technical equipment

  • Control panel for power management and monitoring of liquid levels
  • Safety cutout, fault current breaker, battery main switch
  • Own, independent power supply for the body
  • 6 AGM batteries 24 V – 630 Ah, effectively useable energy 7.8 kWh
  • Uninterruptible power supply through 2 inverters 230 V (50 Hz),
    continuous output 6 kW, peak output 12 kW, charging power 3.6 kW
  • Solar system 2090 W mit MPPT solar regulators
  • Sockets for 230 V AC and USB charging

    Telemonitoring
  • Body batteries: voltage, electricity, capacity, temperature, history
  • Chassis batteries: voltage
  • Generator batteries: voltage
  • Solar system: voltage, yield
  • Position

    Generator
  • Air-cooled generator with 2-cylinder gasoline engine
  • Performance 14.5 kW / 13.4 kVA
  • Mounted in an exterior storage box
  • Own power supply with starter battery, charger and solar system
  • Mobile Honda EU20i generator, gasoline powered, performance 1.6 kW

    Compressed air system
  • Kaeser 2-cylinder air compressor
  • Performance 3 kW, 400 V
  • Flow rate 375 l/min at 8 bar
  • Mounted in an exterior storage box
  • Additionally mounted compressed air tanks for secondary consumers
  • Preheating by built-in heating elements

    Lighting
  • LED lights dimmable in the living area, above the table, kitchen, bed, and shower
  • LED reading lights dimmable at the bed and in the seating area
  • LED lights in the workshop
  • LED flashlight with charging station
  • LED work lights at the rear
  • Telescopic pole with LED work lights, 2 x 185 W, each 20,000 lm

    Fresh water system
  • 2 water tanks with 2 water pumps and filters
  • Tank capacity 900 liters (237.7 US gallons),
    freeze-proof fresh water tanks, mounted inside the body
  • All water installations are laid frost-proof in the heated indoor area
  • 60 liter (15.8 US gallon) hot water heat exchanger with electric heater
  • City water connector
  • Outside shower
  • Compressed air wintering of the water system

    Waste water system
  • Wastewater tank capacity 220 liters (58.1 US gallons),
    freeze-proof mounted inside the body
  • Pneumatic outlet valve, heated
  • Discharge from the cab and body

    Toilet system
  • Sealand toilet with flushing
  • Holding tank capacity 140 liters (36.9 US gallons), freeze-proof mounted inside the body
  • Vacuum tank ventilation with activated carbon filter
  • Pneumatic outlet valve, heated
  • Discharge from the cab and the body

    Heating system
  • Hot water central heating (9 kW) for diesel operation with height adjustment
  • Additional heating unit (5.2 kW) for gasoline operation with height adjustment
  • Radiator in the seating area, in the kitchen and in the workshop
  • Towel radiator in the shower
  • Antifrost system

    TV / video
  • 32″ Full HD LED TV, Blu-ray player

    LPG supply
  • Miele Wok LPG-flame stove
  • 2 x 11 kg LPG bottels
  • Regulator with pressure gauge
  • Shut-off valve from inside the cabine

    Others
  • Pneumatic lighting pole with LED work lights and HD camera
    mounted on the front of the body
  • Wi-Fi signal amplifier for improved Wi-Fi reception
  • Satellite phone
  • Mobile CB radio
  • Satellite tracking system with alerting
  • Rearview camera
  • Wheater station
  • Smoke detector
  • Awning for the entrance area, dimensions: 2500 mm (98.4″) x 1500 mm (59.0″)

General information

  • 18,000 kg (39,683 lbs)

    Curb weight incl. fresh water and fuel
  • 13,850 kg (30,534 lbs)
  • Axle load distribution: 50% 1st axle, 50% 2nd axle

    Overall dimensions
  • Length 6912 mm (272.1″), width 2512 mm (98.8″), height 3996 mm (157.3″)
  • Additional length drawbar: 2144 mm (84.4″)
  • Additional length workshop ladder folded: 232 mm (9.1″)