Chassis
- Mercedes-Benz G 6×6
- Single cab, 2-door
- Wheel base 3120 mm + 1100 mm (122.8“ + 43,3“)
- Mercedes-Benz diesel or gas engine
- Automatic transmission
- Cruise control
- 2-speed transfer case with off-road reduction
- All wheel drive selectable
- Differential lock in front axle
- Differential locks in rear axles
- Coil spring suspension front and rear
- Stabilizers on front and rear axles
- Tires 37×12,5 tubeless
- Spare wheel 37×12,5 tubeless
- aluminium wheels 8,5×18
- Fuel tank capacity: 96 liters diesel (25 US gal.)
- Lashing eyes for recovery or lashing during transportation by ship
- LED headlights
- LED taillights
- Rearview camera
- USB charging ports
- Passage to body with sound insulation panel
- 2 leather seats, heated and ventilated
- Leather steering wheel
- Integrated air conditioning
- Electric windows
- Central locking with remote control
- Satellite navigation (GPS)
Body with lifting roof
Outer dimensions of the retracted body
- Length 5797 mm (228.2“)
- Width 2180 mm (85.8“)
- Height 2168 mm (85.4“)
Inner dimensions of the retracted body
- Length 5501 mm (216.6“),
- Width 2036 mm – 2096 mm (80.2“ – 82.5“)
- Height in the hallway area 2040 mm (80.3“)
- Height in the seating area 1740 mm (68.5“)
- Height in the bed area 860 – 620 mm (33.9“ – 24.4“)
Body construction
- Fully insulated monocoque – sandwich construction
- Carbon fiber composite material
- Top layer thickness 1.5 mm / 1.0 mm (0.06“ / 0,04“)
- High fiber content thanks to vaccum infusion process
- Connection between the outer and inner layers without cold bridges
- Full-surface, closed-cell rigid foam insulation
- Floor panel with GFRP/CFRP supporting structure and steel inserts
Lifting roof
- Fully insulated expedition proven UNICAT lifting roof
- Double sealing when retracted and extended
Inner dimensions of the extended body
- Length 5501 mm (216.6“),
- Width 2036 mm – 2096 mm (80.2“ – 82.5“)
- Height in the hallway area 2090 mm – 2240 mm (82.3“ – 88.2“)
- Height in the seating area 1940 mm – 2060 mm (76.4“ – 81.1“)
- Height in the bed area 1180 mm – 1046 mm (46.5“ – 41.2“)
Frame assembly
- 3-point kinematic attachment with main and flex mounts for
stress-free body coupling to the torsion elastic chassis frame
Entrance door with integrated steps
- Fold-out door in the rear slope with 3 built-in steps
- Double sealing through combined hollow profile and lip seal
- Can be folded in and out from inside and outside
- Anti-theft stainless steel hinges
- Security lock with security profile cylinder
- Motorized operation as well as manual hand operation
- Mosquito net for entrance door
Storage compartment doors
- Fold-out doors in the rear slope left and right
- Double sealing through combined hollow profile and lip seal
- Anti-theft stainless steel hinges
- Motorized operation as well as manual hand operation
Windows
- Scratch-resistant, burglar-proof UNICAT windows made of tempered glass.
- Combined UNICAT partial hinged windows on the side of the seating area.
- UNICAT hinged windows in the kitchen and bathroom.
- UNICAT fixed window on the side of the bed
- UNICAT vent windows at the front of the bed, electrically operated
- Panes made of laminated safety glass with an insulating space
- Anti-theft hinges and latches
- Aluminum-frame roller blinds and black-out mosquito net
Access to driver cab
- Passage to the cab with highly flexible waterproof bellows coupling
- Removable door panel to close passage way
Rear carrier
- Electrically lowerable support frame to accommodate the spare wheel and a STARLINK antenna
Storage boxes under the body
- Storage boxes under the body in front of the rear axle on the left and right
- Storage boxes with 35° slope under the body behind the rear axle on the left and right.
Interior Layout
Bed
- Double bed with ventilation, heating and comfort mattress
- Mattress size: 1524 mm x 2019 mm x 140 mm (60.0“ x 79.5“ x 5.5“)
- Mattress suspension with adjustable spring elements, height 40 mm (1.6“)
Seating area
- U-shaped seating area for 4 persons
- Rotatable and lowerable table
- Seating unit converts to additional bed: 1450 mm x 2000 mm (57.1“ x 78.7“)
- Can be used as a lounge with additional upholstery elements
Bathroom and shower
- Variable bathroom and shower with door to the hallway
- Sliding shower enclosure with integrated sink
- Wall cabinet with mirrors above the sink
- Integrated flush toilet
- Floor with slope and drainage channel
- Trash can integrated into the toilet podium facing the hallway
- Wall mirror integrated into the wall facing the hallway
Kitchen
- Kitchen cabinet with drawers on ball bearing full extensions
- Flush-mounted stainless steel sink with stainless steel fittings
- MIELE induction hob with 2 cooking zones
- Cabinet body for fridge-freezer with drawer for provisions underneath
- LIEBHERR fridge-freezer-ice maker, 175 l (46.3 gal.) cooling, 71 l (18.8 gal.)
- MIELE convection oven with microwave
- Drawers with shock-proof separation for glasses, tableware and cookware
- Drawer for cutlery
- Drawers for provisions
- Overhead cupboards above kitchen
- Lowerable coffee machine integrated into the kitchen overhead cupboard
Storages
- Storage compartments and shelves next to the bed
- Wardrobe in the back area near the entrance
- Storage cupboard in the rear area near the entrance
- Upper cabinet above the entrance door
- External storage compartment in the rear left
- External storage compartment for outdoor kitchen in the rear area on the right
- Storage boxes under the body in front of and behind the rear axle on the left and right
Workmanship
- All furniture is built to the highest cabinetmaking standard
- Furniture made of wood core plywood
- Heavy duty locks and hinges
- All drawers on ball bearings
Layout
- Floor with additional insulation in wood or rubber
- Walls are painted with multiple coats
- Foam-laminated wall and ceiling paneling
- Seat upholstery made of high quality fabricTechnical equipment
Electrical equipment
- Control panel for power management and monitoring of liquid levels
- Safety cutout, fault current breaker, battery main switch
- Independent power supply system for the body, 13,8 V system
- 3 LiFeYPO4 batteries 12,8 V, 330 Ah, nominal energy 12,7 kWh
- Uninterruptible power supply through 2 inverters 230 V 50 Hz,
continuous output 8,0 kW, peak output 20,0 kW, charging power 6,1 kW
- 2 international battery chargers, 90-260 V (45-65 Hz), charging power 1,4 kW
- Sockets for 230 V AC and USB charging sockets
Solar system
- Solar system 1840 W with MPPT solar regulators
- Solar system main interrupter
Telemonitoring
- Body-batteries: Voltage, electricity, capacity, temperature, history, position
- Solar system: Voltage, Yield
- Chassis-batteries: Voltage
Lighting
- LED RGBWW light strips, dimmable on the ceiling
- LED RGBWW light strips, dimmable in the kitchen, bathroom and entrance area
- LED-RGBWW ambient lighting integrated all around in the structure walls
- LED RGBWW ambient lighting integrated into the kitchen worktop
- LED gooseneck reading lights can be dimmed on the beds and the seating area
- LED strips in the outside storage compartments
Fresh water system
- 2 drinking water tanks with 2 water pumps and filters
- Tank capacity: 412 liter (108.8 gal.)
- 20 liter (5.3 gal.) hot water heat exchanger with electric heater
- City water connector
- Outside shower hot and cold
- Frost-proof water tanks and installations, mounted in the heated indoor area
- Quick winterization of the water system
Wastewater system
- Wastewater tank capacity 200 liter (52.8 US gal.)
- Electrically actuated discharge valve with heating
- Discharge switches in the cab and in the body
- Frost-proof tank and installations mounted in the heated indoor area
Toilet system
- Gravity toilet with water flushing
- Toilet tank capacity 158 liter (41.7 gal.)
- Vacuum tank ventilation with activated carbon filter
- Electrically actuated discharge valve with heating
- Discharge switches in the cab and in the body
- Frost-proof tank and installations mounted in the heated indoor area
Heating system
- Hot water heating (5.0 kW) for diesel operation with height adjustment
- Heat exchanger for air heating of the living area and bed area
- Towel radiator in the shower
- Bed heating under the mattress
- Antifrost system
Air conditioning
- Integrated 12 V DC air conditioner for living area and bed area
- Cooling cap. 3.2 kW ( 10.464 BTU/h), electric power cons. each 1,4 kW
- Operation via batteries, generator or shore power
Ventilation
- Ventilation system for effective air exchange with heat recovery
- smoke detector
TV / internet
- Dual-GSM router
- WIFI
- 27° 4K monitor
- Apple-TV
General information
Dimensions
- Length 7005 mm (275.8“)
- Width 2192 mm (86.3“)
- Height 3254 mm (128,1“) with 37×12,5 tires
- Additional length spare tire rack: 459 mm (18.1“)
- Departure angle at front 59°
- Departure angle at rear 46°
Weights
- Curb weight including fresh water and fuel: 6.286 kg (13.859 lbs)
- Gross vehicle weight rating: 6.600 kg (14.551 lbs)
- Axle load distribution: 28% front axle, 36% each rear axle
Optional equipment chassis
- Central tire inflation system
- Impact protection bar with LED light strip
- Additional headlights and side lights
Optional equipment body
- Fold-out longitudinal beds, 1800 mm x 2019 mm x 140 mm (70.9“ x 79.5“ x 5.5“)
- Upholstery made of Alcantara or leather according to customer requirements
- Fold-out table with electric table base
- CORIAN kitchen worktop
- Digital control and monitoring system ETA Powerplex
- UV-C LED drinking water disinfection system for 2 water tanks
- Washing machine 3kg (6.6 lbs) with dryer
Delivery time and prices
- On request